Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Winch Bumper

  • Brian.SMC
  • Topic Author
  • Visitor
  • Visitor
    Public
08 Aug 2010 18:22 - 08 Aug 2010 18:23 #4129 by Brian.SMC
Winch Bumper was created by Brian.SMC
Spent most of today on this, just the winch plate to make and mount and then the bull bar.
Winch Plate and Bumper can be removed independantly of each other. Not for mine but for another lad on SMC.
Feel free to copy or basterdise lads.

[IMG


Chassis plated with 4mm mild.
[IMG


[IMG

[IMG

[IMG

[IMG

[IMG

[IMG

[IMG

[IMG
Last edit: 08 Aug 2010 18:23 by Brian.SMC.

Please Log in or Create an account to join the conversation.

  • renard38
  • Visitor
  • Visitor
    Public
09 Aug 2010 05:20 - 09 Aug 2010 05:20 #4131 by renard38
Replied by renard38 on topic Re:Winch Bumper
nice work B)
Last edit: 09 Aug 2010 05:20 by renard38.

Please Log in or Create an account to join the conversation.

  • darthloachie
  • Visitor
  • Visitor
    Public
09 Aug 2010 05:35 #4134 by darthloachie
Replied by darthloachie on topic Re:Winch Bumper
some skills there B) - you ought to go into business selling them.
Can't wait to see a pic with the winch fitted

Please Log in or Create an account to join the conversation.

  • Knight.
  • Visitor
  • Visitor
    Public
09 Aug 2010 06:24 #4137 by Knight.
Replied by Knight. on topic Re:Winch Bumper
I like it :)

Please Log in or Create an account to join the conversation.

More
09 Aug 2010 10:48 #4145 by ooky_123
Replied by ooky_123 on topic Re:Winch Bumper
Brian, Love it ...
Former owner of Little "Ooky", who has now started a new life in Shetland

Please Log in or Create an account to join the conversation.

  • Brian.SMC
  • Topic Author
  • Visitor
  • Visitor
    Public
14 Aug 2010 12:11 #4222 by Brian.SMC
Replied by Brian.SMC on topic Re:Winch Bumper
Thanks a lot guys appreciated.

Nearly there just the bull bars to fit and an alloy fairlead.
I have not fitted the bars as I want to make a template first, make it easier on me if I ever make another.

[IMG

[IMG

[IMG

[IMG

[IMG

Please Log in or Create an account to join the conversation.

  • Brian.SMC
  • Topic Author
  • Visitor
  • Visitor
    Public
15 Aug 2010 16:44 #4235 by Brian.SMC
Replied by Brian.SMC on topic Re:Winch Bumper
Well it was a fecin lot of work, if I was doing more sheet bumpers, I would need to get a lot of the cutting and bending done at the engineers.

Just the fairlead to fit when it arrives. I also made a proper front recovery point as I know the fella is still saving for a winch. Its onto the 6mm winch plate which is bolted in 6 places to the chassis.

[img

[img

[img

Please Log in or Create an account to join the conversation.

More
15 Aug 2010 17:37 #4237 by mlines
Replied by mlines on topic Re:Winch Bumper
Those bars are nice (Just changing a Kingpin bearing if I am not mistaken)
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Brian.SMC
  • Topic Author
  • Visitor
  • Visitor
    Public
17 Aug 2010 14:24 - 17 Aug 2010 14:32 #4269 by Brian.SMC
Replied by Brian.SMC on topic Re:Winch Bumper
Yes mate need both sides and wheel bearing.


Finished.

[IMG
Last edit: 17 Aug 2010 14:32 by Brian.SMC.

Please Log in or Create an account to join the conversation.

Time to create page: 0.176 seconds
Joomla template by a4joomla