Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
renard38's jimny
- renard38
- Topic Author
- Visitor
-
Public
15 May 2011 17:36 #16367
by renard38
Replied by renard38 on topic Re: renard38's jimny
Please Log in or Create an account to join the conversation.
- srcars
- Visitor
-
Public
16 May 2011 14:35 #16404
by srcars
Replied by srcars on topic Re: renard38's jimny
Dont you ever goto work :laugh: Yours must be the most used Jimny on here, fair play to you, Thats one cool looking SJ too
Please Log in or Create an account to join the conversation.
16 May 2011 15:28 #16407
by Obarno
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15
Replied by Obarno on topic Re: renard38's jimny
It looks as if your friend with the SJ has a road legal car with an external roll cage. I thought they weren't allowed in France - so have put an internal in my Jimny, and had an internal in my SJ as well!
Good off roading where you are - we had a good couple of days in the Cevennes last weekend. Very rocky and hilly, but good fun.
Good off roading where you are - we had a good couple of days in the Cevennes last weekend. Very rocky and hilly, but good fun.
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15
Please Log in or Create an account to join the conversation.
- renard38
- Topic Author
- Visitor
-
Public
18 May 2011 17:15 #16511
by renard38
Replied by renard38 on topic Re: renard38's jimny
hi,
my friend with the SJ ( with an external roll cage) use it "only" in off road. :evil:
My bowls were dry lately. The grease was gone ..... So I returned today, with good marine grease that is resistant to water
I first disassembled seal bowl (to put lots of grease and grease behind the seal again)
and then removed the pin on it to grease in it, I hope that lubricate the bearing pivot foot:
A+
my friend with the SJ ( with an external roll cage) use it "only" in off road. :evil:
My bowls were dry lately. The grease was gone ..... So I returned today, with good marine grease that is resistant to water
I first disassembled seal bowl (to put lots of grease and grease behind the seal again)
and then removed the pin on it to grease in it, I hope that lubricate the bearing pivot foot:
A+
Please Log in or Create an account to join the conversation.
- renard38
- Topic Author
- Visitor
-
Public
20 May 2011 15:13 #16611
by renard38
Replied by renard38 on topic Re: renard38's jimny
hi,
yesterday, changing the rear bushes of the radius arm ( ORA ) from my frien Adrix with 12t press
A+
yesterday, changing the rear bushes of the radius arm ( ORA ) from my frien Adrix with 12t press
A+
Please Log in or Create an account to join the conversation.
- renard38
- Topic Author
- Visitor
-
Public
21 May 2011 15:12 #16658
by renard38
Replied by renard38 on topic Re: renard38's jimny
Please Log in or Create an account to join the conversation.
Time to create page: 0.170 seconds