Warning: Undefined variable $end_tag_params in /mnt/Main_Volume_2/www/bigjimny.com/libraries/kunena/External/Nbbc/src/BBCode.php on line 2321

Warning: Undefined variable $end_tag_params in /mnt/Main_Volume_2/www/bigjimny.com/libraries/kunena/External/Nbbc/src/BBCode.php on line 2321
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Jimny Bearing Retainer

More
28 May 2009 14:26 #744 by Jamie
Jimny Bearing Retainer was created by Jamie
Hi There
Martin here is a pic of my bearing retainer considerably different
god knows why they changed them

[IMG

Please Log in or Create an account to join the conversation.

More
28 May 2009 15:10 - 28 May 2009 18:17 #745 by mlines
Replied by mlines on topic Re:Jimny Bearing Retainer
Are you sure thats not the same retainer that I sent you, has it not got the ABS ring pushed over the top?

Martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 28 May 2009 18:17 by mlines.

Please Log in or Create an account to join the conversation.

More
28 May 2009 15:15 #746 by Jamie
Replied by Jamie on topic Re:Jimny Bearing Retainer
Now thats an idea let me go check

Please Log in or Create an account to join the conversation.

More
28 May 2009 15:38 #747 by mlines
Replied by mlines on topic Re:Jimny Bearing Retainer
I am reasonably sure I am right as my 2004 parts manual shows that retainer ring I sent you 43485-77E51 and the ABS outer ring 56451-77E00 joined together.

Martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
28 May 2009 16:25 #748 by Jamie
Replied by Jamie on topic Re:Jimny Bearing Retainer
Well after a hot session with the mapp gas i have a ring removed from the
retainer really easy to get off cant belive i didnt notice it myself
thanks martin sometimes you need a fresh pair of eyes

So the bearings and seals you supply fit new Jimnys aswell handy to know!!

Pics

[IMG


[IMG

Please Log in or Create an account to join the conversation.

More
28 May 2009 17:35 #749 by mlines
Replied by mlines on topic Re:Jimny Bearing Retainer
You did well to get the ring off. Everyone I know has had to chisel the ABS ring off, destroying it in the process.

Martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
28 May 2009 18:05 #750 by Jamie
Replied by Jamie on topic Re:Jimny Bearing Retainer
It is the same principle as removing a ring gear on a flywheel
just get the teeth cherry red and it pops straight off

Just to get it back on now!!

Please Log in or Create an account to join the conversation.

More
29 May 2009 15:30 #759 by Jamie
Replied by Jamie on topic Re:Jimny Bearing Retainer
All done now and its all quiet for the time being
i dont think suzuki could make it more difficult
to change a rear bearing just hope the other side
stays quiet for a while now

Thanks for the help Martin

Please Log in or Create an account to join the conversation.

Time to create page: 0.141 seconds
Joomla template by a4joomla