Is 4xfourart Lift Kit Really the Best for Jimny ?

Hello, 

I am looking to lift my Jimny 4inches , after my research and talking to people who drive lifted Jimny's ; I came to conclusion that 4xfourart kit does the job better than other kits. However there is not many available in Mexico. I know it is the top selling in Australia and European countries and all that but I never actually get to test drive one here in Mexico. I am going to order it all the way from Europe and before I do , I am looking for more opinions here. Also found this article online about testing jimny kits;   www.becce.net/en/blog/content/best-suzuk...on-2025-full-list-32   

Anyone with any experience with the kit here? I am actually planing to do some hardcore offroading. 

Short answer : Yes . If you are actually going to go offroading or overlanding. For the city use it is unnecessary. But for overlanding and offroading I can say that 4xfourart is on a different level compare to other kits. I have a workshop in greece and work a lot with suzuki models. I installed many different lift kits to jimnys here but by far 4xfourart is more meant for offroading. their kit has many extra parts such as arms , extended rods and so on that makes the articulation much better. Also it is very durable. As mentioned earlier not necessary for city driving but if you are going to offroad , then I would say go for it !

I could be wrong, but I don't think the 4xfourart stuff is common outside of Europe.

teamghettoracing.com/vehicles/cars/2019-...4w/recommended-mods/

Here's a link to an Australian page that documents the most popular stuff there.

Personally I think a four inch lift on a Jimny is overkill, but you know where you plan on taking it, I don't.

I can't comment on the specific kit as such but I'm going to assume it is because you are wanting to get some fairly oversized tyres underneath? Just to be clear the supporting mods associated with huge tyres on a jimny are extensive and include things like a transfer box regear, axle tube trusses, chassis clearance work, body clearance work and potentially even wheelbase length alterations. Doing it properly so it all works together and behaves something like a drivable car when done is not a simple thing.

The two initial posts in this thread do have some traits of stealth marketing, I find. I suspect they might be from the same person.

Same. Also suspect other and these posts to be from AI agents.

Edit: checked both these posts with on line services scanning for traces of AI generated content and they both came back as human. 

Still, The world is mad and going to hell, and we have no option but to go there with it.