A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Steering issues (its all over the place) after replacing Swivel Hubs
- davidandped
- Topic Author
- Offline
- New Member
-
Registered
08 Aug 2026 13:17 #265065
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Steering issues (its all over the place) after replacing Swivel Hubs
The wheel alignment wants setting with the steering wheel centralised (assuming it was right before) Probably it was done before with the worn out bearings.
Having to keep correcting it could just be too much toe-out at the moment or the king pins could be shimmed too tight.
Get the wheel alignment done first.
Having to keep correcting it could just be too much toe-out at the moment or the king pins could be shimmed too tight.
Get the wheel alignment done first.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- davidandped
- Topic Author
- Offline
- New Member
-
Registered
Time to create page: 0.553 seconds