BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Help me understand my Jimny please

More
19 Jan 2026 08:53 #263474 by Maidan
Replied by Maidan on topic Help me understand my Jimny please
Thanks for your reply. Here are some photos of the radius arms.

 
Attachments:

Please Log in or Create an account to join the conversation.

More
19 Jan 2026 12:02 #263477 by DrRobin
Replied by DrRobin on topic Help me understand my Jimny please
It’s difficult to see, but the last picture, the radius arm doesn’t look very straight?
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

More
19 Jan 2026 19:04 #263483 by Maidan
Replied by Maidan on topic Help me understand my Jimny please
Hi Robin,

Thanks for replying. I wonder if it’s an issue with my phone camera. To the eye, I think it looks ok.
Here are photos of both radius arms from the front of the vehicle.
 
Attachments:

Please Log in or Create an account to join the conversation.

More
20 Jan 2026 00:24 #263487 by fordem
Replied by fordem on topic Help me understand my Jimny please
Perhaps you could measure the wheelbase on both sides & compare...
The following user(s) said Thank You: Maidan

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
20 Jan 2026 06:47 #263490 by Lambert
Replied by Lambert on topic Help me understand my Jimny please
The second photo that radius arm is definitely bent.
Temeraire (2018 quasar grey automatic)
Pavement princess or back road menace?
Bellerophon (2024 grello van daily)
ADORJ Attention Deficit Ooooh Race Jimny!

Please Log in or Create an account to join the conversation.

More
20 Jan 2026 09:35 #263491 by Maidan
Replied by Maidan on topic Help me understand my Jimny please

The second photo that radius arm is definitely bent.
Hi thanks for taking the time to reply. Those last two photos were taken from the front of vehicle and it’s a right hand drive. So you mean the radius arm for the passenger side looks bent? I didn’t peg that when I looked before. I’ll have to have another look tomorrow morning.

I measured the wheel bases tonight. They are only out by about 2mm.
-2258mm on the left side (passenger side)
-2260mm on the right side (driver side)

Please Log in or Create an account to join the conversation.

Time to create page: 0.238 seconds
Joomla template by a4joomla