A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Axle Trussing and CV's for 30"
- jackonlyjack
-
- Offline
- Platinum Member
-

Registered
Less
More
- Posts: 3102
- Thank you received: 704
14 Nov 2025 19:17 #262751
by jackonlyjack
Replied by jackonlyjack on topic Axle Trussing and CV's for 30"
Says single 1250kg at 75psi
I only run them at 25psi on motorways
20psi for local roads
12~15psi off road
Tyres are yokohama geolandar X-MT
So not cheap, road manners are good
Only 76db so nice and quiet too
I only run them at 25psi on motorways
20psi for local roads
12~15psi off road
Tyres are yokohama geolandar X-MT
So not cheap, road manners are good
Only 76db so nice and quiet too
Please Log in or Create an account to join the conversation.
15 Nov 2025 06:57 #262753
by iac27
2006 JB43 from Japan // 215/70R16 Toyo AT3's with 2" RPG lift // Castor corrected front arms front and bushings back // high clearance plastic bumpers // adjustable panhard bars
Replied by iac27 on topic Axle Trussing and CV's for 30"
Beefy indeed. For crawling it wouldn’t matter I guess. Nice tires!
2006 JB43 from Japan // 215/70R16 Toyo AT3's with 2" RPG lift // Castor corrected front arms front and bushings back // high clearance plastic bumpers // adjustable panhard bars
Please Log in or Create an account to join the conversation.
Time to create page: 0.176 seconds
