BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Rear panhard rod bent

More
21 May 2025 15:42 #260525 by JimnyCol
Replied by JimnyCol on topic Rear panhard rod bent
   

I will bring the bar to a shop with a hydraulic press to straighten it. 

The relocation bracket is now fitted: 



 
Colombia: 2017 Jimny JB43, M13A 163,000 km, +4 cm XT suspension lift, TTS rear air diff locker, Easy Traction manual transfer shifter, AISIN free wheel manual hubs, WARN 55-S winch

Please Log in or Create an account to join the conversation.

More
21 May 2025 16:01 #260528 by jackonlyjack
Replied by jackonlyjack on topic Rear panhard rod bent
I would not try to straighten it........ They're like tissue paper thin
If you cannot get one made I personally would weld a suitable piece of angle iron the full length and weld at intervals 
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug

Please Log in or Create an account to join the conversation.

More
21 May 2025 16:05 #260529 by JimnyCol
Replied by JimnyCol on topic Rear panhard rod bent
Right, today I noticed they are so thin... maybe the shop will figure out how to fabricate one and maybe a little tougher.
Colombia: 2017 Jimny JB43, M13A 163,000 km, +4 cm XT suspension lift, TTS rear air diff locker, Easy Traction manual transfer shifter, AISIN free wheel manual hubs, WARN 55-S winch

Please Log in or Create an account to join the conversation.

Time to create page: 0.151 seconds
Joomla template by a4joomla