A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Gen4 Auto, footwell hot during off-roading.
11 Apr 2025 14:51 #260110
by fordem
I don't think it does, or rather, there is nothing in my owner's manual that suggests the light comes on for an over temp condition.
Replied by fordem on topic Gen4 Auto, footwell hot during off-roading.
Does anyone know when the auto temp idiot light goes on?
I don't think it does, or rather, there is nothing in my owner's manual that suggests the light comes on for an over temp condition.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9228
- Thank you received: 1851
11 Apr 2025 18:59 #260111
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Gen4 Auto, footwell hot during off-roading.
I seem to remember reading something about it flashing the selector symbol on the display in the dashboard but I can't remember if it was even jimny related or just general suzuki?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
11 Apr 2025 21:51 #260112
by SRD0060
Replied by SRD0060 on topic Gen4 Auto, footwell hot during off-roading.
Good morning, there is a few things going on with the floor of the Jimny;
- the exhaust runs stright under the left foot well with a hotdog type muffler there (heat retainer),
- the auto does generate a lot of heat and,
- the floor is 1.2 - 1.6mm tin with no heat shielding.
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2987
- Thank you received: 672
12 Apr 2025 17:21 #260116
by jackonlyjack
Replied by jackonlyjack on topic Gen4 Auto, footwell hot during off-roading.
Please Log in or Create an account to join the conversation.
Time to create page: 0.153 seconds