A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hi friends,
has anyone with a K6a jimny experienced the following:
On starting, the engine runs smoothly around 1500rpm. Then, after about 2 seconds the engine shutters, bogs down to 600rpm, a check engine light illuminates, then it immediately corrects to a rough idle around 1300rpm with the check engine light remaining on.
I know its a long shot but im hoping someone can point me in the right direction.
thanks for reading!
First off, thank you immensely for the reply. I read through the wiki and it was helpful. My understanding so far is that I need to
1) buy transponder (will have to research unless you can reccomend one)
2) download that kind russian programmers app
3) bridge the diag fuse or two pins on the OBD connector
4) enjoy having some diagnostics displayed in the app
