A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
So, I've been wanting to change some values in my stock ECU and in the meantime learn a little bit about tuning, but I know nothing of the basic things that I need to start.
what is the best program to start tuning the ECU? And what should I buy in regards to the obd2 interface and equipment? (I have a laptop to work on obviously)
I could be wrong as this is not my area of expertise but the stock ECU is not readily tuned. That would require something like a Haltec or Link or similar standalone unit. There may be specialist outfits that have cracked the factory one for some parameters but I'm not aware of it being a DIY option?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
So what you're saying is, it's not certain whether I can unlock the stock ECU?
if that's the case do you know any cheap aftermarket ones that I could use?
So what you're saying is, it's not certain whether I can unlock the stock ECU?
if that's the case do you know any cheap aftermarket ones that I could use?
lol. Unlock it to do what? A song and dance routine
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
