A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

What corrections needed for 40mm lift?

More
29 Aug 2018 10:39 #195519 by yakuza
LSPV is the load sensor for the brakes?

There is none if your car has ABS.
Mlines said so in another post on here.

Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.

Please Log in or Create an account to join the conversation.

  • ramonmaruko
  • Topic Author
  • Visitor
  • Visitor
    Public
29 Aug 2018 13:25 #195527 by ramonmaruko
Replied by ramonmaruko on topic What corrections needed for 40mm lift?
But my model doesn't have ABS.

Please Log in or Create an account to join the conversation.

More
30 Aug 2018 01:15 #195550 by zukebob
The market area configuration differences gets confusing and you will need to do some filtering of information on the forum. Essentially the rundown for the Philippine late model Jimny is:

VVT.....nope
Air bags (through the 2017 model)......nope
ABS.....nope
Load proportioning valve......nope

We aren't the only market area with some basic differences but most of what you will see here will still apply.

I started out with nothing & still have most of it left
The following user(s) said Thank You: ramonmaruko

Please Log in or Create an account to join the conversation.

Time to create page: 0.121 seconds
Joomla template by a4joomla