A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Since my 2015 Jimny went on 35" tyres the low pressure warning light is constantly on. The sensors were moved to the new wheels but since I usually keep the pressure at 20 psi (or less) the quickest way to get rid of the light is to get the speedo cluster out and cut the wire leading to the bulb. Does anyone have a recent diagram that shows which wire leads to this bulb?
Of course I could, but it seems too much trouble totally dismantling the instrument cluster, pulling the hands of the dials, etc. and risking messing something up.
You say in your first post, You are going to remove the cluster to cut the wire. When you remove the cluster, You will see that the bulbs just clip in on a bayonet type fitting. Just remove the relevant bulb.
Yes, they have a pressure monitoring system. I already have the cluster out (i'm installing a speedo corrector) and it seems that you need to split it and access the bulbs from the front.
Daniel30 wrote: black tape or sticker of some description over the top of the bulb?
Yes, that is exactly what I just did! Great minds think alike
The 2015 model has diodes in the console, not bulbs. The Suzuki dealer over here told me that this console was not repair-able.