A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Length of M13a engine

More
21 May 2020 10:40 #222629 by jackonlyjack
Replied by jackonlyjack on topic Length of M13a engine
Mine say's 3 degrees tilted back
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug
The following user(s) said Thank You: minorsuzuki

Please Log in or Create an account to join the conversation.

More
21 May 2020 11:39 #222632 by Keithy
Replied by Keithy on topic Length of M13a engine
Mines a little tilty thing.





My drive slopes....calibration needed
Attachments:
The following user(s) said Thank You: minorsuzuki

Please Log in or Create an account to join the conversation.

More
21 May 2020 12:23 #222636 by minorsuzuki
Replied by minorsuzuki on topic Length of M13a engine
Thanks Jack and Keith. Was that 5.4 degrees measured after calibrating for the sloping drive? My plan will be to jack up the front of the car until the engine is at the standard Jimny angle then take out the filler plug and see how much oil comes out.
Morris Minor Traveller with M16a Liana engine and Jimny gearbox.

Please Log in or Create an account to join the conversation.

More
21 May 2020 13:07 #222637 by Keithy
Replied by Keithy on topic Length of M13a engine
I wouldn't worry about the angle tbh......Jimny's get to some strange angles off the beaten track.

Congratulations on your recovery!

I worked at Major Minor in the late 80's.....saw some strange conversion there!

Please Log in or Create an account to join the conversation.

More
21 May 2020 21:11 #222649 by yakuza
Replied by yakuza on topic Length of M13a engine
I wouldn't worry about the gear oil either. When I done my oil changes I haven't been too particular on keeping the car level. I don't think a 5-10 degrees off would make the oil level too much off to make any difference. Using the correct oil and frequent changes is more important on a suzuki gearbox.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.

Please Log in or Create an account to join the conversation.

More
04 Oct 2020 12:14 #228768 by minorsuzuki
Replied by minorsuzuki on topic Length of M13a engine
My car is featured in the November copy of Practical Classics magazine


.
Morris Minor Traveller with M16a Liana engine and Jimny gearbox.
The following user(s) said Thank You: Keithy, Soeley

Please Log in or Create an account to join the conversation.

More
04 Oct 2020 12:37 #228770 by sniper
Replied by sniper on topic Length of M13a engine
Quality stuff, great build....

sniper

Please Log in or Create an account to join the conversation.

Time to create page: 0.152 seconds
Joomla template by a4joomla