A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
List of Engines to Swap in
- OllieNZ
- Topic Author
- New Member
-
Public
11 Jan 2017 16:51 - 12 Jan 2017 19:20 #176574
by OllieNZ
List of Engines to Swap in was created by OllieNZ
Hi All,
I've been attempting to compile a list of engines that could be/have been swapped into a Jimny.
I've tried to ensure the information is as accurate as possible, the weights however are open for discussion and the power/torque figures may change depending on the exact variant of the engine.
I've been attempting to compile a list of engines that could be/have been swapped into a Jimny.
I've tried to ensure the information is as accurate as possible, the weights however are open for discussion and the power/torque figures may change depending on the exact variant of the engine.
Last edit: 12 Jan 2017 19:20 by OllieNZ. Reason: List Update
Please Log in or Create an account to join the conversation.
- Gazguzzler
- New Member
-
Public
- OllieNZ
- Topic Author
- New Member
-
Public
11 Jan 2017 18:00 #176589
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic List of Engines to Swap in
I know its not going to help your conversion, but it would be intersting to know what a m16a vvt specs are as ive got a m13a vvt jimny 
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- TomDK
- New Member
-
Public
- OllieNZ
- Topic Author
- New Member
-
Public
11 Jan 2017 18:14 #176593
by OllieNZ
Don't know how I missed those 2 :blush:
I'll update the list with the m13a vvt and the m16a vvt at some point in the next few days.
Replied by OllieNZ on topic List of Engines to Swap in
Riccy wrote: I know its not going to help your conversion, but it would be intersting to know what a m16a vvt specs are as ive got a m13a vvt jimny
Don't know how I missed those 2 :blush:
I'll update the list with the m13a vvt and the m16a vvt at some point in the next few days.
Please Log in or Create an account to join the conversation.
Time to create page: 0.676 seconds