A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
www.theinternet.com
, lead me to a sign which read; I believe me memory isn't that good anymore,
But I paraphrase "check back a big change is taking place."
Which is true, as you see I still don't have a manual to rebuild. I am really good at tearing apart, just talk to the wife and kids. They will be more then helpful filling you all in on the tear downs, but the rebuilds I need help. Sooo please HELP! A big change will take place If I can't source a proper manual.
I kind of figured you ment that.
I have this manual, but it seems that the model I am working on was produced in Spain. I guess they are using different transmissions. The sn413 manual shows a horizonally split transmission and this one is vertically split. So in mine mind there must be a differnece in thrust washers and spacing.
It will be a later m13aa if it has a vertical split gearbox, the Spanish bit is a red herring. The manual you need is 99501-81A10-01E
Sent from my GT-I9100 using Tapatalk 2
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Sorry, information would be helpful.
2006 Suzuki Jimny 1.3l vvt M13A, with a R72 5 spd manual trans.
Sorry no pictures, but it is a smashing white.
I've looked on line for that manual and ebay uk has a couple of Jimny cds for sale. How would I know if it has this particular manual is installed? Never hurts to ask a question does it?
