A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

4wd not working any sugestions ???

vitara_mad
Topic Author
Visitor
Public

27 Mar 2013 15:49 #67061 by vitara_mad

4wd not working any sugestions ??? was created by vitara_mad

i have a jimny but the 4wd is not working when selecting 4wd theres no light on dash & no hubs locking ive tryed replacing the switch on the transfer box but still same its not a problem ive come accross before so not sure what else to check

the transfer box is engaging 4wd as ive checked the front prop so its electrical problem i pressume

any suggestions on what else to check would be great

thanks

Please Log in or Create an account to join the conversation.

SpeeLaT
Offline
Junior Member
Registered

27 Mar 2013 16:42 #67066 by SpeeLaT

Replied by SpeeLaT on topic 4wd not working any sugestions ???

Or it could be one of your vac lines to the hubs has come off/got a hole in it. Do you have a hand vac pump to test?

Please Log in or Create an account to join the conversation.

reaper
Visitor
Public

27 Mar 2013 18:12 #67072 by reaper

Replied by reaper on topic 4wd not working any sugestions ???

As said could be an air line on the hub also check under right wing that is where the receiver lives the lines run down the drivers side radius arm and can take a hit

Please Log in or Create an account to join the conversation.

gus2000
Visitor
Public

27 Mar 2013 21:02 #67097 by gus2000

Replied by gus2000 on topic 4wd not working any sugestions ???

Check de vacuum circuit (sorry, in spanish)

and the electric circuit (in english)

Gustavo

Please Log in or Create an account to join the conversation.

vitara_mad
Topic Author
Visitor
Public

27 Mar 2013 23:46 #67118 by vitara_mad

Replied by vitara_mad on topic 4wd not working any sugestions ???

thats the sort of thing im looking for but in english & simple terms :cheer:

thanks gus

i don't think its as simple as the vucume pipes as its the system the tells them to lock where i think the problem is i thought it was going to be the switch in trans box as i pressume thats where it all starts from when selecting 4wd the switch tells something that its been selected & tells the hubs to lock

Please Log in or Create an account to join the conversation.

facade
Offline
Platinum Member
Registered

28 Mar 2013 06:20 #67122 by facade

Replied by facade on topic 4wd not working any sugestions ???

The easiest place to start is with the switch on the transfer box, check there are wires connecting to it, then try joining the wires together at the plug, if this puts the light on the switch is faulty, but it is more likely to be the wires.

If it suddenly breaks, go back to the last thing that you did before it broke and start looking there

Please Log in or Create an account to join the conversation.

Time to create page: 0.132 seconds

4wd not working any sugestions ???

Events Menu