A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

4wd not working any sugestions ???

  • vitara_mad
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Mar 2013 15:49 #67061 by vitara_mad
4wd not working any sugestions ??? was created by vitara_mad
i have a jimny but the 4wd is not working when selecting 4wd theres no light on dash & no hubs locking ive tryed replacing the switch on the transfer box but still same its not a problem ive come accross before so not sure what else to check

the transfer box is engaging 4wd as ive checked the front prop so its electrical problem i pressume

any suggestions on what else to check would be great

thanks

Please Log in or Create an account to join the conversation.

More
27 Mar 2013 16:42 #67066 by SpeeLaT
Replied by SpeeLaT on topic 4wd not working any sugestions ???
Or it could be one of your vac lines to the hubs has come off/got a hole in it. Do you have a hand vac pump to test?

Please Log in or Create an account to join the conversation.

  • reaper
  • Visitor
  • Visitor
    Public
27 Mar 2013 18:12 #67072 by reaper
Replied by reaper on topic 4wd not working any sugestions ???
As said could be an air line on the hub also check under right wing that is where the receiver lives the lines run down the drivers side radius arm and can take a hit

Please Log in or Create an account to join the conversation.

  • gus2000
  • Visitor
  • Visitor
    Public
27 Mar 2013 21:02 #67097 by gus2000
Replied by gus2000 on topic 4wd not working any sugestions ???
Check de vacuum circuit (sorry, in spanish)

[img


[img


[img


and the electric circuit (in english)

[img


Gustavo

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Mar 2013 23:46 #67118 by vitara_mad
Replied by vitara_mad on topic 4wd not working any sugestions ???
thats the sort of thing im looking for but in english & simple terms :cheer:

thanks gus

i don't think its as simple as the vucume pipes as its the system the tells them to lock where i think the problem is i thought it was going to be the switch in trans box as i pressume thats where it all starts from when selecting 4wd the switch tells something that its been selected & tells the hubs to lock

Please Log in or Create an account to join the conversation.

More
28 Mar 2013 06:20 #67122 by facade
Replied by facade on topic 4wd not working any sugestions ???
The easiest place to start is with the switch on the transfer box, check there are wires connecting to it, then try joining the wires together at the plug, if this puts the light on the switch is faulty, but it is more likely to be the wires.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there :)

Please Log in or Create an account to join the conversation.

More
28 Mar 2013 09:01 #67125 by mlines
Replied by mlines on topic 4wd not working any sugestions ???
As shown in the diagrams above, there is a fuse and a controller. If you have checked the switch then you should look at whether the controller has power to it and is working

Martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • gus2000
  • Visitor
  • Visitor
    Public
28 Mar 2013 11:50 #67134 by gus2000
Replied by gus2000 on topic 4wd not working any sugestions ???
Vitara_Mad I got them in English :)

[img


[img

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • Topic Author
  • Visitor
  • Visitor
    Public
28 Mar 2013 15:41 #67142 by vitara_mad
Replied by vitara_mad on topic 4wd not working any sugestions ???
thanks for the help i will check out the control unit

Please Log in or Create an account to join the conversation.

More
28 Mar 2013 17:01 - 28 Mar 2013 17:02 #67144 by Halford
Replied by Halford on topic 4wd not working any sugestions ???
that's fantastic info Gus2000
if anyone wants to get it in English simply enter the text here translate.google.co.uk/ you don't by any chance have similar info for the push-button 4wd do you or is it basically the same :dry:
the ex Dog-Taxi
Last edit: 28 Mar 2013 17:02 by Halford.

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • Topic Author
  • Visitor
  • Visitor
    Public
30 Mar 2013 20:53 #67369 by vitara_mad
Replied by vitara_mad on topic 4wd not working any sugestions ???
just bought some aisin manual hubs for it just in case

Please Log in or Create an account to join the conversation.

Time to create page: 0.164 seconds
Joomla template by a4joomla