A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Help bleeding brakes
GuardianAngel
New Member
Public
25 Mar 2013 16:19 #66900
by GuardianAngel
I should also add I replaced the rear cylinders so had fresh un-rusted nipples!
Please Log in or Create an account to join the conversation.
GWR
New Member
Public
GuardianAngel
New Member
Public
25 Mar 2013 17:46 #66916
by GuardianAngel
GWR wrote: Halfrauds do a 8mm coz I've got one :whistle:
Fair enough! I went down to my local and the computer said no!
Please Log in or Create an account to join the conversation.
MWells
New Member
Public
25 Mar 2013 17:48 #66918
by MWells
There is also a bleed nipple on the brake bias valve at the back of the car.
Please Log in or Create an account to join the conversation.
beretta
Topic Author
New Member
Public
25 Mar 2013 17:59 #66919
by beretta
Cheers thats all very usefull, hopefully by this time tomorrow i should be all sorted......
Please Log in or Create an account to join the conversation.
Ally
New Member
Public
26 Mar 2013 13:17 #67008
by Ally
If the bleed nipples ar seized use some boiling water on them first and use a hex socket just to get them moving.
Please Log in or Create an account to join the conversation.
Time to create page: 0.130 seconds
