BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Stir Fry 'Shifter...

More
04 Nov 2012 19:50 #52284 by mlines
Replied by mlines on topic Stir Fry 'Shifter...
Bolt 9 in the above picture is quite important as well

The remote mechanism forms part of the rear gearbox mounts (not in picture) these can break as well.
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Beano

Please Log in or Create an account to join the conversation.

  • Beano
  • Topic Author
  • Visitor
  • Visitor
    Public
05 Nov 2012 20:47 #52406 by Beano
Replied by Beano on topic Stir Fry 'Shifter...
Just an update folks...

Thought it may be useful for anyone else who may be having the same problem if i give you the final result of this...

Basically, underneath the Jim, in the transmission tunnel where the shifter comes through from the cab, ALL of the bolts that connect the shifter linkage to the gearbox were loose.

I mean COMPLETELY loose. To the point where one had even already fallen out!!
All tightened up and missing one replaced, problem solved! B)

Just thought that may be useful for others to know before you go ripping apart anything!

Thanks all for the advice / pictures..

Bean

Please Log in or Create an account to join the conversation.

  • Tadpole
  • Visitor
  • Visitor
    Public
06 Nov 2012 09:57 #52447 by Tadpole
Replied by Tadpole on topic Stir Fry 'Shifter...
Pleased is was that easy for you, thanks for the update ..

Please Log in or Create an account to join the conversation.

Time to create page: 0.148 seconds
Joomla template by a4joomla