A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

4wd light flashing on dash

More
11 Nov 2012 22:24 #52962 by facade
Replied by facade on topic 4wd light flashing on dash
join the 2 wires that go to the vacuum switch together, don't forget to plug the vacuum tapping on the inlet manifold.

Or just plug the rubber pipes that go down to the axle.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there :)
The following user(s) said Thank You: Smoggy

Please Log in or Create an account to join the conversation.

  • Smoggy
  • Visitor
  • Visitor
    Public
11 Nov 2012 22:30 #52964 by Smoggy
Replied by Smoggy on topic 4wd light flashing on dash
Thanks Facade,

I have already removed every link of vacuum pipe from the car (got SJ axles on my car) and have already plugged up vacuum pipe hole on inlet manifold. Will join wires on switch as you suggest

Please Log in or Create an account to join the conversation.

Time to create page: 0.190 seconds
Joomla template by a4joomla