A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

SJ410 prop shaft suitable for t-box conversion?

Paul4x4
Topic Author
Visitor
Public

05 Oct 2012 17:43 #49556 by Paul4x4

SJ410 prop shaft suitable for t-box conversion? was created by Paul4x4

I have probably three of those 410 transmission prop shafts laying around, and just one slightly damaged 413 prop, so I was thinking if I could instead use the 410 prop for the conversion. Does it fit, or is it too long? I compared the props side by side, and the 410 one is just about 1" longer than the "big block's" prop, but is that too much??

I think I'm gonna get the ORA fitting kit, and I have no idea how much space there will be left for the prop shaft.

Please Log in or Create an account to join the conversation.

vitara_mad
Visitor
Public

06 Oct 2012 17:48 #49620 by vitara_mad

Replied by vitara_mad on topic SJ410 prop shaft suitable for t-box conversion?

the 410 prop will be too long

Please Log in or Create an account to join the conversation.

Paul4x4
Topic Author
Visitor
Public

06 Oct 2012 19:29 - 06 Oct 2012 19:35 #49624 by Paul4x4

Replied by Paul4x4 on topic SJ410 prop shaft suitable for t-box conversion?

vitara_mad wrote: the 410 prop will be too long

It must be a tight fit then, because the length difference is so little! In that case I just have to make it fit, or find myself an intact samurai prop...

Here's a comparison pic.

Attachments:

Last edit: 06 Oct 2012 19:35 by Paul4x4.

Please Log in or Create an account to join the conversation.

Time to create page: 0.128 seconds

SJ410 prop shaft suitable for t-box conversion?

Events Menu