A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
What Grease? - Replace KingPins and Wheel Bearings
Less
More
- Posts: 1249
- Thank you received: 115
29 Aug 2010 07:12 #4429
by maverick
Jalapeño, IISY?
What Grease? - Replace KingPins and Wheel Bearings was created by maverick
Thats it really ...
I'm replacing O/S and N/S KingPins and Wheel Bearings - what Grease should i use ?
I'm replacing O/S and N/S KingPins and Wheel Bearings - what Grease should i use ?
Jalapeño, IISY?
Please Log in or Create an account to join the conversation.
29 Aug 2010 10:54 #4431
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:What Grease? - Replace KingPins and Wheel Bearings
Philip, from this forum, has sent me over some Waterproof Grease and I am in contact with the supplying company to see if I can sell it. However that is a bit down the line.
Its a high temperature, high standard grease that is water proof.
Its Maxima Waterproof Grease - see here.
www.motocrossworld.com/site/scripts/prod...php?product_id=30128
Its a high temperature, high standard grease that is water proof.
Its Maxima Waterproof Grease - see here.
www.motocrossworld.com/site/scripts/prod...php?product_id=30128
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1249
- Thank you received: 115
29 Aug 2010 15:21 #4433
by maverick
Jalapeño, IISY?
Replied by maverick on topic Re:What Grease? - Replace KingPins and Wheel Bearings
Cheers Martin ... I'll get some of that
Jalapeño, IISY?
Please Log in or Create an account to join the conversation.
Time to create page: 0.126 seconds