A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Removing steering box?
- Smoggy
- Topic Author
- Visitor
-
Public
- markyp2000
- Visitor
-
Public
- Smoggy
- Topic Author
- Visitor
-
Public
08 Jul 2012 17:48 #43725
by Smoggy
Replied by Smoggy on topic Re: Removing steering box?
Yeah sorted that just like you said Mark.
Next big task was to get the pitman arm bolt off, ready for the new drop arm to go with my lift. Got the really tight bolt off with easing oil, heat and the help of my windy gun - eventuallly.
Then I found the pitman arm was welded onto the box splines, despite heat and easing oil and the help of my slide hammer attached to a puller it still wouldnt budge
So ive left it overnight steeped in plusgas.
Next big task was to get the pitman arm bolt off, ready for the new drop arm to go with my lift. Got the really tight bolt off with easing oil, heat and the help of my windy gun - eventuallly.
Then I found the pitman arm was welded onto the box splines, despite heat and easing oil and the help of my slide hammer attached to a puller it still wouldnt budge
So ive left it overnight steeped in plusgas.
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
08 Jul 2012 18:15 #43726
by markyp2000
Replied by markyp2000 on topic Re: Removing steering box?
try some pipe frezze from a plumers center and try and freeze the splines so it shrinks just an idear let us no how you get on 
Please Log in or Create an account to join the conversation.
- aniesigh
- Visitor
-
Public
- markyp2000
- Visitor
-
Public
Time to create page: 0.150 seconds