A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Brake hoses

Dave c
Topic Author
Visitor
Public

14 Jun 2012 21:37 #42384 by Dave c

Brake hoses was created by Dave c

Getting close to needing to get axles piped with hoses breathers air etc plan to use Goodridge or Aeroquip bit confused over there sizing Goodridge call brake size fittings 600 series and Aeroquip -3 anyone know if its interchangable ??? and does it use the same hose ??? and the best place to buy it dont want stainless just good old plated will do fine checked out Demon theives damn them boys can charge

Attachments:

Please Log in or Create an account to join the conversation.

kirkynut
Offline
Moderator
Registered

15 Jun 2012 16:24 #42417 by kirkynut

Replied by kirkynut on topic Re: Brake hoses

Are you talking about flexi's or rigid brake pipes?

If you are talkinga bout flexi's, the Bigjimny shop is where to get them from!!!

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

15 Jun 2012 16:47 #42418 by mlines

Replied by mlines on topic Re: Brake hoses

Standard fitments are here - www.bigjimny.com/store/index.php/off-roa...hose-sets/p_122.html - suitable for up to a 5" lift

The standard set of three is Â£66. Custom ones are available to order in any length/style you require. Cost is mainly dependent on the fittings required at each end rather than the length. So banjos etc. for calipers will change the price but not by much.

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

zuki andy
Visitor
Public

15 Jun 2012 17:30 #42420 by zuki andy

Replied by zuki andy on topic Re: Brake hoses

try a local hydraulics hose firm, most of them stock the goodridge type hose, and will make them up to your requiements.

Please Log in or Create an account to join the conversation.

Dave c
Topic Author
Visitor
Public

16 Jun 2012 10:02 #42455 by Dave c

Replied by Dave c on topic Re: Brake hoses

Thanks guys thinking maybe then if suitable for a 5 inch lift the Jimny store ones could do me fine does anyone know the actual length of the pipes so i can have a measure up ? just need to be sure as my axles are a bit wider and front calipers are mounted at 9 O clock rather than 12 O clock as on a jimny axle

Please Log in or Create an account to join the conversation.

Time to create page: 0.130 seconds

Brake hoses

Events Menu