A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Draper expert nut extractor sockets
15 May 2012 16:10 - 15 May 2012 16:17 #40347
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Draper expert nut extractor sockets was created by facade
Has anyone used these and can rate them compared to the Irwin versions?
They are a different design, just like ratchet teeth.
They are about 1/2 the price of a set of Irwins, I fancy a nice present.
What puts me off is the "Expert Quality". In The Olden Days, that label meant good stuff, now it is stuck on the cheap toffee spanners.
On the other hand, type "Irwin" into eBay and they make their share of cheap tools as well :S
They are a different design, just like ratchet teeth.
They are about 1/2 the price of a set of Irwins, I fancy a nice present.
What puts me off is the "Expert Quality". In The Olden Days, that label meant good stuff, now it is stuck on the cheap toffee spanners.
On the other hand, type "Irwin" into eBay and they make their share of cheap tools as well :S
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Last edit: 15 May 2012 16:17 by facade.
Please Log in or Create an account to join the conversation.
- supergaz
- Visitor
-
Public
- Smoggy
- Visitor
-
Public
- vitara_mad
- Visitor
-
Public
- Smoggy
- Visitor
-
Public
15 May 2012 19:03 - 15 May 2012 19:11 #40362
by Smoggy
Replied by Smoggy on topic Re: Draper expert nut extractor sockets
Oops it appears ive misread the thread and looked up screw extractors in error. Anyway seeing as ive looked up the info, heres the top 3 from a leading car mechanics magazine.
Last edit: 15 May 2012 19:11 by Smoggy.
Please Log in or Create an account to join the conversation.
15 May 2012 19:11 #40363
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: Draper expert nut extractor sockets
Cheers guys
I think I'd best get a set of Irwins, will have to wait until next month though.
The Draper look as though they might just chew the nut to completely round.
I think I'd best get a set of Irwins, will have to wait until next month though.
The Draper look as though they might just chew the nut to completely round.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.207 seconds