A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
King Pins and E10
- auchenblae
- Topic Author
- Offline
- Elite Member
-
Registered
16 Jul 2010 17:27 - 16 Jul 2010 17:27 #3853
by MigCooper
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Replied by MigCooper on topic Re:King Pins and E10
Hi
I would wait if I has you. A friend damaged one using the 8mm and couldn't remove it after...
use the correct tools for the job.
I would wait if I has you. A friend damaged one using the 8mm and couldn't remove it after...
use the correct tools for the job.
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Last edit: 16 Jul 2010 17:27 by MigCooper.
Please Log in or Create an account to join the conversation.
- auchenblae
- Topic Author
- Offline
- Elite Member
-
Registered
16 Jul 2010 17:41 #3856
by auchenblae
eddie
16 SZ3
07 JLX+ gone 16
99 JLX gone 07
Replied by auchenblae on topic Re:King Pins and E10
MigCooper wrote:
I knew that would be the case. So good to wait.
eddie
Hi
use the correct tools for the job.
I knew that would be the case. So good to wait.
eddie
eddie
16 SZ3
07 JLX+ gone 16
99 JLX gone 07
Please Log in or Create an account to join the conversation.
- P.Y.
- Visitor
-
Public
29 Jul 2010 17:31 #3992
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re:King Pins and E10
You just want an e10 socket to fit your toolkit.
Any motor factors will sell you one.
Halfords do a set
But if you are doing a lot of maintenance, and you don't have any tools, it might be an idea to buy a toolkit, halfords have a good one on a special offer, pretty much everything you will ever need for £120,
go to halfords.com and put 370635 in the search box. It is a lot of money to undo 12bolts though....
Any motor factors will sell you one.
Halfords do a set
But if you are doing a lot of maintenance, and you don't have any tools, it might be an idea to buy a toolkit, halfords have a good one on a special offer, pretty much everything you will ever need for £120,
go to halfords.com and put 370635 in the search box. It is a lot of money to undo 12bolts though....
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.141 seconds