A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Does anyone know where we can get bolts that hold on the backing plate behind front discs. Theres 4 either side of truck and the heads on ours are well fecked. Even a part number. The trucks a 54 plate.
Well the manual lists it as M10 x 25mm which are pretty easy to get hold of. Its doesn't state the thread which could be standard or metric fine.
If your feeling rich the part number is 09117-10057
Otherwise a quick search of the Internet will throw up lots of suppliers - I use
www.shop4fasteners.co.uk/
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
