A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hi, what stops the lower part of the extension bracket from rotating when the axle has one wheel lower or higher than the other? Is it just the face contact and the tightness of the bolt or if not , what stops the bolt from coming loose?
I have mine fitted with washers either side, but tbh its still fairly solid. The shocker is in a much better poition with the brackets fitted than when it was before, and theres enough movement on the bush to articulate.
thanks gary, i'll give it a whirl and see how it goes. There are a lot of them around so it should be ok. if necessary i'll weld them on or completely fabricate a complete mount.
BryD
i wouldnt weld them on, i may be wrong, but i think the move a little when the shock moves,
on a different note, i had them fitted then took them off again, my 2 rear shocks got burst seals with them on, my fault tho, its still on standard supension.
