A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Jimny /spring Spacers

More
13 Dec 2011 18:55 #28088 by mcjimny
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by mcjimny on topic Re: Jimny /spring Spacers
By my maths i work out my tyres of 195/15 (usually 80 profile) to be 27" tall but as i see it from others its not an exact science with the remoulds! The same maths if its working right :unsure: work yours out to be 28". Some say 215's catch without a lift some have no problems at all. Going by mine(and an inch difference is negligible) i would say risk it. Its only going to catch on full lock on the arch liners.

'

Black Jimny's don't get stuck!

Please Log in or Create an account to join the conversation.

  • Gromit
  • Visitor
  • Visitor
    Public
13 Dec 2011 18:57 #28089 by Gromit
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Gromit on topic Re: Jimny /spring Spacers
I have 215/75 Kingpin A/T tyres with a 2" bodylift & 1" spring spacers and they still catch on full lock !!!

Please Log in or Create an account to join the conversation.

  • zuki andy
  • Visitor
  • Visitor
    Public
13 Dec 2011 19:29 #28092 by zuki andy
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by zuki andy on topic Re: Jimny /spring Spacers
try them on and see where they rub first. im sure you'll just get away with just trimming a little off the front and rear bumpers, :unsure:

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
13 Dec 2011 20:07 #28097 by supergaz
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by supergaz on topic Re: Jimny /spring Spacers
I can't fault bits4vits, they fit nicely into the seat and are moulded to the end of the coil.

Please Log in or Create an account to join the conversation.

  • nicho
  • Visitor
  • Visitor
    Public
17 Dec 2011 11:07 #28429 by nicho
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by nicho on topic Re: Jimny /spring Spacers
have a look at the recent body lift topic in chat wanderinstar.maybe a idea for you n its free.

Please Log in or Create an account to join the conversation.

  • jo king
  • Visitor
  • Visitor
    Public
17 Dec 2011 14:52 #28441 by jo king
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by jo king on topic Re: Jimny /spring Spacers
I had 1" spacers and I cut the original rubbers down and put them inbetween the spacer and the spring locators on the chassis. And I put 225 75 15 colway mt with no rub what so ever. but I do have to say not all tyres are as whats stated on the tyre as these were retreads. It was not about the price I just wanted a little lift with the same on road manners. I will go for 1.25" as I feel that this is the right height but will get spring sacers as well this time round. ;)

Please Log in or Create an account to join the conversation.

Time to create page: 0.135 seconds
Joomla template by a4joomla