A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Standard Jimny springs

  • TomDK
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Nov 2011 19:22 #26670 by TomDK
Standard Jimny springs was created by TomDK
Hi

Can anyone tell me what specifications are on standard Jimny springs, that is total unsprung length and spring rate.

I'm considering these springs, www.lowrangeoffroad.com/index.php/builde...id-coil-springs.html but don't know what length and spring rate to buy. You may know that I'm planning on a Cosworth V6 or perhaps Lexus V8, so this should be taken into consideration also.

Please Log in or Create an account to join the conversation.

More
27 Nov 2011 15:06 #26723 by SpeeLaT
Replied by SpeeLaT on topic Re: Standard Jimny springs
I just replaced my springs with Monroe Adventure's (Standard). The old springs I have are 280 mm rear and 330 mm Front. I am sure they have sagged the new standard springs lifted the car a fair bit. I couldn't get my hand between the rear tyre and the top of the arch palm side on top to bottom. Now my hand has plenty of room.

Please Log in or Create an account to join the conversation.

  • Cocopolo
  • Visitor
  • Visitor
    Public
28 Nov 2011 10:26 #26781 by Cocopolo
Replied by Cocopolo on topic Re: Standard Jimny springs
Stock springs are front 33cm, rear 29cm for the gasoline older version
on newer gasoline versions (VVT engine), front ones are 35cm long.

The rate, for the stock springs, should be around 120lbs/inch

Hope this helps

Please Log in or Create an account to join the conversation.

  • Black Toy
  • Visitor
  • Visitor
    Public
14 Jun 2012 12:44 #42340 by Black Toy
Replied by Black Toy on topic Re: Standard Jimny springs
sorry mate, seems incorrect for newer petrol VVT models since we just instaled a trailmaster lift kit (should be about +2") and the coil springs have about 370 mm front and 330 mm rear





Please Log in or Create an account to join the conversation.

Time to create page: 0.156 seconds
Joomla template by a4joomla