BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

engine change

  • russell
  • Topic Author
  • Visitor
  • Visitor
    Public
30 Oct 2011 20:13 #24851 by russell
engine change was created by russell
hey guys im awaiting a new engine for my jimny its a sohc 1.3 any ideas on what there like to change and any handy tips?

Please Log in or Create an account to join the conversation.

  • aniesigh
  • Visitor
  • Visitor
    Public
30 Oct 2011 21:42 #24871 by aniesigh
Replied by aniesigh on topic Re: engine change
4 bolts on the bellhousing plus little 10mm nut that holds the dust shield on, 2 engine mounts, 2 radiator hoses, air inlet pipe, throttle cable, exhaust down pipe (2 bolts, possibly rusted in!) main power wires on starter motor, couple fuel lines, then unplug all the wiring plugs. think thats about it!
installation is the reverse of removal ;)
fairly straight forward stuff, plenty of room to get to most of it apart from some stuff on the drivers side of the motor.

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
30 Oct 2011 21:45 #24873 by supergaz
Replied by supergaz on topic Re: engine change
Before installing the new engine its definately worth changing the timing belt. ;-)

Please Log in or Create an account to join the conversation.

  • martysmith
  • Visitor
  • Visitor
    Public
31 Oct 2011 21:29 #24940 by martysmith
Replied by martysmith on topic Re: engine change

supergaz wrote: Before installing the new engine its definately worth changing the timing belt. ;-)

i agree it will only take a few mins ..............and if it was me i would fit a new clutch too will save time in future

Please Log in or Create an account to join the conversation.

  • russell
  • Topic Author
  • Visitor
  • Visitor
    Public
01 Nov 2011 17:43 #24969 by russell
Replied by russell on topic Re: engine change
yea id alwaysfit timeing belt and clutch as matter of course it looks prety straight forward to me was just checking if there was any hidden gremlins when it can to changeing them, but thanks for the help once again guys

Please Log in or Create an account to join the conversation.

  • martysmith
  • Visitor
  • Visitor
    Public
01 Nov 2011 18:07 #24970 by martysmith
Replied by martysmith on topic Re: engine change

russell wrote: yea id alwaysfit timeing belt and clutch as matter of course it looks prety straight forward to me was just checking if there was any hidden gremlins when it can to changeing them, but thanks for the help once again guys

you should have nee botha mate good luck ;)

Please Log in or Create an account to join the conversation.

Time to create page: 0.124 seconds
Joomla template by a4joomla