A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
valve clearances
- small-torque
- Topic Author
- Visitor
-
Public
27 Sep 2011 14:44 #22678
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: valve clearances
Adjustable by flicking out shims and replacing them. Quite a lot of trouble.
If it sounds tappety when cold, it might be piston slap, just at startup check the timing chain tensioner is working.
Actually, a 2007 is a VVT engine: does it have 5/30 oil in it?
How many miles has it done?
If it sounds tappety when cold, it might be piston slap, just at startup check the timing chain tensioner is working.
Actually, a 2007 is a VVT engine: does it have 5/30 oil in it?
How many miles has it done?
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- small-torque
- Topic Author
- Visitor
-
Public
28 Sep 2011 17:52 #22736
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: valve clearances
Get the oil and filter changed and see if the noise goes.
Suzukis don't like dirty oil, they will seize a cam in no time. :ohmy:
Suzukis don't like dirty oil, they will seize a cam in no time. :ohmy:
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.120 seconds