A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hi
I`m looking for any pictures of their bent SJ transfer sticks when fitting the sj box into a jimny please
so it will give me a starting point before fitting my box
i have a SJ T-case in my Jimny ... i didnt bend the stick, i just made the hole bigger ... made the hole bigger at the rear/bottom of the hole (if that makes sense) ... so not the top end toward the front of the car, not the sides ...
i don't have a pic but if you start where the big bend is at the bottom make that straight & then test fit & adjust from there thats what i did & it worked out fine
