A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Props
13 Jun 2011 16:48 #17726
by ooky_123
Former owner of Little "Ooky", who has now started a new life in Shetland
Well, started with good intentions of fitting the RockLobster that has been sat in the shed for almost 2 months and have hit a bit fo a snag ...
Below is a picture of the 2 props I have to use
Now unless im being megga thick (which is a possibility! ) ... the mini prop I have on teh Jimny has a pair of flanged ends where as the one in the above picture has a splined end ...
I just wanted to check with the masses if I should split the UJ and just use the standard Jimny flange that is on the gearbox.....
Below is a picture of the 2 props I have to use
Now unless im being megga thick (which is a possibility! ) ... the mini prop I have on teh Jimny has a pair of flanged ends where as the one in the above picture has a splined end ...
I just wanted to check with the masses if I should split the UJ and just use the standard Jimny flange that is on the gearbox.....
Former owner of Little "Ooky", who has now started a new life in Shetland
Please Log in or Create an account to join the conversation.
Time to create page: 0.120 seconds