A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
sj transfer box
- Cider
- Topic Author
- Visitor
-
Public
28 May 2011 21:07 #17043
by MigCooper
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Replied by MigCooper on topic Re: sj transfer box
Cider
You can have a look around and will find loads on this subject, but for starters you need a SJ413 transfer case and 2 SJ axles the mini one and the front one to fit the Jimny rear .... More to that you also need a mounting kit to fit the case in the Jimny, you can get one in ORA ( www.offroad-armory.com )
Have a look at the manuals section ( here
the manual you need is ( How to fit an SJ Transfer Case ) number 11
do some introduction and get some pics of your jimny for us 
You can have a look around and will find loads on this subject, but for starters you need a SJ413 transfer case and 2 SJ axles the mini one and the front one to fit the Jimny rear .... More to that you also need a mounting kit to fit the case in the Jimny, you can get one in ORA ( www.offroad-armory.com )
Have a look at the manuals section ( here
the manual you need is ( How to fit an SJ Transfer Case ) number 11
do some introduction and get some pics of your jimny for us _________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Please Log in or Create an account to join the conversation.
- Keefe
- Visitor
-
Public
29 May 2011 09:50 - 31 May 2011 08:58 #17052
by Keefe
Replied by Keefe on topic Re: sj transfer box
I think you'll find MigCooper meant prop shafts not axles.
Last edit: 31 May 2011 08:58 by Keefe. Reason: spelling
Please Log in or Create an account to join the conversation.
31 May 2011 05:49 #17129
by MigCooper
Yes yes .... prop shafts :laugh: thanks Keefe
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Replied by MigCooper on topic Re: sj transfer box
Keefe wrote: I think you'll find MigCooper meant prop shafts not axels.
Yes yes .... prop shafts :laugh: thanks Keefe
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Please Log in or Create an account to join the conversation.
Time to create page: 0.128 seconds