A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

HEATER BLOWING COLD

  • heidihi
  • Visitor
  • Visitor
    Public
15 Apr 2011 09:37 #15070 by heidihi
Replied by heidihi on topic Re: HEATER BLOWING COLD
Did you manage to fix it?
if not i had problem with this i tried everything nothing was workin i thort maybe there was cracks as i found radweld and my thermo was in wrong way round i started all over again tryin to figure out what was wrong i had driven 35 miles and it was freezing so when i got home i decided to look i know silly idea taking off rad cap but it wasnt until i realised there was no pressure nuffin squirted out so i went online it was like 10-15 for a new one so off i went down scrappys they had no jimnys no vitaras just one swift lucky enough it fitted £ 1.50 i took it for test drive 10 miles down the road i decided to try again and the oil shot up everywhere now my jimny is nice and toasty try it it may be that
hope it works

Please Log in or Create an account to join the conversation.

  • myers647
  • Topic Author
  • Visitor
  • Visitor
    Public
15 Apr 2011 18:53 #15090 by myers647
Replied by myers647 on topic Re: HEATER BLOWING COLD
Eyup mate no I havnt tried anything yet to be honest . The weather has been ok so I'm not too bothered at the minute .il get round to it soon iv got my lift kit conning tomorrow so il be busy with that 1st.

Cheers

Please Log in or Create an account to join the conversation.

Time to create page: 0.101 seconds
Joomla template by a4joomla