A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
rear brake pipes
17 Mar 2011 22:53 #13541
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: rear brake pipes
Just make sure that the male threaded ends have threads right to the end, or re-use the originals.
Most of the cheap threaded fittings have a 5mm plain piece and only go into the wheel cylinders one or two turns so they won't tighten up.
Oh, standard brake pipe is 3/16" o.d.
Most of the cheap threaded fittings have a 5mm plain piece and only go into the wheel cylinders one or two turns so they won't tighten up.
Oh, standard brake pipe is 3/16" o.d.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.123 seconds