A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
bearing !!!!!!
- dc5
- Topic Author
- Visitor
-
Public
11 Oct 2009 16:39 #1341
by dc5
bearing !!!!!! was created by dc5
Hi guys, I`m a 4x4 noob and have just bought my 1999 jimny for going shooting on farmland.
I noticed a small amount of fluid on the road just beside the front left wheel
I know nothing about 4x4`s so I`m after a bit of help and advice.
I took a couple of pics and would like your help identifying the problem.
jase.
I noticed a small amount of fluid on the road just beside the front left wheel
I know nothing about 4x4`s so I`m after a bit of help and advice.
I took a couple of pics and would like your help identifying the problem.
jase.
Please Log in or Create an account to join the conversation.
11 Oct 2009 16:56 #1342
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:bearing !!!!!!
Its either the Kingpin Bearings or the wheel bearing.
Jack the car up and rock the wheel. If it rocks with your hands top and bottom it tends to be the Kingpin bearings. If it rocks with your hands on either side then it tends to be the wheel bearings. Get an assistant to press the brakes. If it still rocks then its the Kingpin bearings, if the rocking stops then its the wheel bearings
My money would be on the Kingpin bearings
Martin
Jack the car up and rock the wheel. If it rocks with your hands top and bottom it tends to be the Kingpin bearings. If it rocks with your hands on either side then it tends to be the wheel bearings. Get an assistant to press the brakes. If it still rocks then its the Kingpin bearings, if the rocking stops then its the wheel bearings
My money would be on the Kingpin bearings
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- dc5
- Topic Author
- Visitor
-
Public
11 Oct 2009 17:08 #1343
by dc5
Replied by dc5 on topic Re:bearing !!!!!!
Thanks martin, I have a mechanic going to look at It next week.
What sort of price would I be looking at for both parts?
jase.
What sort of price would I be looking at for both parts?
jase.
Please Log in or Create an account to join the conversation.
11 Oct 2009 17:13 #1344
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:bearing !!!!!!
Well there is this online shop I have found that sells the parts
Kingpin Bearings
Wheel Bearing
Martin
Kingpin Bearings
Wheel Bearing
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- dc5
- Topic Author
- Visitor
-
Public
11 Oct 2009 17:15 #1345
by dc5
Replied by dc5 on topic Re:bearing !!!!!!
Will It still be ok to drive with this problem?
I bought some diff oil to keep It topped up.
jase.
I bought some diff oil to keep It topped up.
jase.
Please Log in or Create an account to join the conversation.
11 Oct 2009 17:20 #1346
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:bearing !!!!!!
As with all leaks (including blood from your limbs) it always looks more severe than it really is. You will probably find the road is awash with oil but your diff actually takes very little to top it up.
The usual limitation is that you will quickly become scared of the severe steering wobble that will develop (particularly between 30mph and 40 mph)
Martin
The usual limitation is that you will quickly become scared of the severe steering wobble that will develop (particularly between 30mph and 40 mph)
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- dc5
- Topic Author
- Visitor
-
Public
11 Oct 2009 17:28 #1347
by dc5
Replied by dc5 on topic Re:bearing !!!!!!
Yes,I`ve had the steering judder martin.
I`ve ordered both the bearing and kingpin sets, are there any other things that I should fit while these are being done?
jase.
I`ve ordered both the bearing and kingpin sets, are there any other things that I should fit while these are being done?
jase.
Please Log in or Create an account to join the conversation.
11 Oct 2009 18:01 #1350
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:bearing !!!!!!
Jase,
To be honest I would have looked at the Kingpin Bearings first. If you keep the wheel bearing sealed, clean and in its box then you can send it back for a refund once your mechanic has looked at the kingpin bearings. My bet would be that the bottom one has completely rusted out.
Martin
To be honest I would have looked at the Kingpin Bearings first. If you keep the wheel bearing sealed, clean and in its box then you can send it back for a refund once your mechanic has looked at the kingpin bearings. My bet would be that the bottom one has completely rusted out.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- dc5
- Topic Author
- Visitor
-
Public
11 Oct 2009 18:06 #1351
by dc5
Replied by dc5 on topic Re:bearing !!!!!!
Cheers martin, I`ll see what He says mate.
jase.
jase.
Please Log in or Create an account to join the conversation.
Time to create page: 0.146 seconds