A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
The diff housings and the transfer box have breathers, the gearbox doesn't (unless you have a European Diesel).
Prise the caps off the breathers and extend them upwards.
One of the propshafts has the only greasing point on the car so push grease through this on a regular basis and keep the radiator spotless as they are quick to overheat if the radiator is blocked in any way. If yours has a radiator cowl fitted make sure it is clean at the bottom rear after wading.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
