Rear lights

Has anybody wired up the rear body lights so that they work with the bumper lights?
Am I right in thinking that the LHD European models have their body lights working from the factory?
I

Are talking about the lights on the corners near the rear window?

Fitting double stop and tail lights are no prob,you would need a bit of experience with basic wiring second hand stop and tail bulb holders,wire,hole saw and a current tester.

-The top lights are blanket one side so you need to bore holes for the SH bulb holders to fit the other
Is for the fog lamp which you would have to remove for the stop and tail holder I held these with hot glue which can be snapped if you need to change a bulb

- getting your live and earth for your stop tail can be got using a current tester on the wiring loom into the bottom lamps in which you can solider the wires to join then

-it just takes time but looks good when it's done

Cool thanks Benson, will have a look at doing that i think. It seems a waste not to
have them working. It looks good too on the you tube videos when they are working.

yes i did it on my old one, basic wiring and your done!

...look my ...

Uploaded with ImageShack.us