A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
4wd vacum hose set up
22 Aug 2008 09:29 - 22 Aug 2008 09:32 #120
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:4wd vacum hose set up
The wires that run along the radius arms are for the ABS system as far as I know. The vacuum tubes come along the axles. This is the best overall diagram I have.
Here is a higher resolution version attached
Here is a higher resolution version attached
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 22 Aug 2008 09:32 by mlines.
Please Log in or Create an account to join the conversation.
Time to create page: 0.141 seconds