A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Guinea Pigs required!
05 Mar 2011 16:00 #12591
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re: Guinea Pigs required!
Hi,
I'm back, just been doing lots of "jobs" from my wifes list.

Thanks for the PMs, looks like results vary. A couple more people have to report back but initial indications show that "thicker" is better. For those who haven't installed yet it looks like going for the "double up" might be best.
I am also concerned that the effect could wear off, so time will tell.
Thanks for the pictures, Rich. It looks as straight forward to install as I predicted and as its going to be cheap I think it will be a product people can try and if it doesn't work they have only lost £1,000 for the part, 4 weeks waiting for the heavy lift delivery and 6 weeks labour to install, which is not too bad
Martin
I'm back, just been doing lots of "jobs" from my wifes list.



Thanks for the PMs, looks like results vary. A couple more people have to report back but initial indications show that "thicker" is better. For those who haven't installed yet it looks like going for the "double up" might be best.
I am also concerned that the effect could wear off, so time will tell.
Thanks for the pictures, Rich. It looks as straight forward to install as I predicted and as its going to be cheap I think it will be a product people can try and if it doesn't work they have only lost £1,000 for the part, 4 weeks waiting for the heavy lift delivery and 6 weeks labour to install, which is not too bad

Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
05 Mar 2011 16:01 #12592
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re: Guinea Pigs required!
P.S one of the jobs was cleaning the boat (my summer toy) for the upcoming season in Poole so its not all bad!
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- bertbuckie
- Visitor
-
Public
05 Mar 2011 16:50 #12593
by bertbuckie
I'm sure I overheard some girls saying something like that once :laugh:
I will install the others tomorrow or perhaps next week.... need to get bolts for my bike as well.
Replied by bertbuckie on topic Re: Guinea Pigs required!
mlines wrote: initial indications show that "thicker" is better.
I'm sure I overheard some girls saying something like that once :laugh:
I will install the others tomorrow or perhaps next week.... need to get bolts for my bike as well.
Please Log in or Create an account to join the conversation.
- srcars
- Visitor
-
Public
05 Mar 2011 18:27 #12601
by srcars
Where in Poole do you launch from, Baiter ?
Replied by srcars on topic Re: Guinea Pigs required!
mlines wrote: P.S one of the jobs was cleaning the boat (my summer toy) for the upcoming season in Poole so its not all bad!
Where in Poole do you launch from, Baiter ?
Please Log in or Create an account to join the conversation.
05 Mar 2011 18:29 #12602
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re: Guinea Pigs required!
Usually Cobbs Quay but we are trying to get into Salterns/Parkstone this year as that is where we have rented a house.
Martin
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- srcars
- Visitor
-
Public
05 Mar 2011 18:33 #12603
by srcars
Replied by srcars on topic Re: Guinea Pigs required!
Oh very Poosh
I cant wait for the holiday season to start, I work for the local council and trying to get near the beach is nightmare


Please Log in or Create an account to join the conversation.
Time to create page: 0.131 seconds