Guinea Pigs required!

Considering this thread is in the "technical" section I have had more laughs on this thread than for a good while!

Ok, joking aside I have received my delivery and no forklift or pallet truck needed just me, the delivery man, the guy next door, and his mate and I was ready to start.

But Martin I have followed your comprehensive instructions to the letter and something is not right ?

I can not for the life of me fathom the positioning of these parts.

Do I need to fit them all evenly on each side or play with balancing them out to reduce wobble ?

Also the sealant seems to have had an adverse effect on the parts and one is now broken so I have an uneven number (I think the sealant was toxic).

Placing the broken one over the gas ring only made things worse (see previous post)

What I have done is fitted 2 on the near side and one on the off side for now.

I have included a photo below of the off side instalation in the hope that you can spot what I have done wrong and point me in the right direction.

P.S. As per the thread title I do have a friend who breeds Guinea Pigs If supply of willing volunters dries up.

Anyway onto the pictures

If any body can help with what I have done wrong please shout.





Maybe I should have painted Guinea Pig Power on my front diff

hahahaha

Nice one, very funny!

that hamster looks great!!!

On the assumption you are also really referring to the real item as well as the Hampsters. My theory was that you fit the same to both sides. If it looks like each side takes two then it sounds like future ones need to be thicker. This may also prevent them breaking, they are certainly soft after the recommended processing.

These should not need playing with. I will pop another in the post.

Martin

:blush: Sorry Martin,

I was jesting, I will be fiiting them for real in the morning. No replacement needed. :blush:

srcars wrote: :blush: Sorry Martin,

I was jesting, I will be fiiting them for real in the morning. No replacement needed. :blush:

Too late, ive just seen martin walking to the post office!

Pulling a sledge?