A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
a few jimny issues
24 Apr 2012 21:16 #38541
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Re: a few jimny issues
I now its an old thread but I have just had the same hand brake light issue.
I traced the problem to the ignition switch. If the car was started without the handbrake on the light comes on briefly and should go off. However there was a bad contact in the ignition switch that kept the feed to the light in position 3 (flick to start). Simply wiggling the key sorted this out.
So I cleaned the contacts in the barrel with WD40 and its sorted.
Thought this may help someone.
I traced the problem to the ignition switch. If the car was started without the handbrake on the light comes on briefly and should go off. However there was a bad contact in the ignition switch that kept the feed to the light in position 3 (flick to start). Simply wiggling the key sorted this out.
So I cleaned the contacts in the barrel with WD40 and its sorted.
Thought this may help someone.
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
- ZookFastback
- Visitor
-
Public
Time to create page: 0.115 seconds