A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
i just aquire a 2012 jinmy 1.3 and the trader has left me with no rear indicators.
i checked the bulbs and they seem ok ,the flasher seems ok as the front indicators are working, the hazrard lights are working all ok , so not sure what to check next, is it likely the bulbs are faulty even tho the filament looks ok?
there are differences between markets and models wether the blinkers are down in the bumper or up on the C-pillar.
Do the other lights in the same lamp work? If your blinkers are placed down low, do the other lights in the same cluster work?
If not there might be a grounding problem for the cluster. Follow the wiring loom towards the chassi and see if there is proper connection to ground.
Also often the wiring for the trailer plug is done badly and can cause problems if it isnt one of the proper plug in loom type.
i checked the rear lights and theyre not working either ,dunno where to look for connector plugs to check for earths ,i can check the bulbs with a meter next
Normally the wires for the bumper pass through a grommet in the body accessed by removing the bumper and looking behind the rubber flap on the passenger side. Once in there it will be fairly obvious if someone has been in before you and butchered the loom for trailer lighting.
logo.
