A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Suspension for bull bar with 4” lift

Noahmills
Topic Author
Offline
New Member
Registered

29 Oct 2025 09:19 #262512 by Noahmills

Suspension for bull bar with 4” lift was created by Noahmills

Hello everyone,

it’s my first post woohoo, I am just wondering what people have done for front springs with a bull bar and winch and a 4” lift, I can find 2” rated springs but there doesn’t seem to be any 4” rated springs anywhere available. I also don’t really want to do spring spacers as that will make the springs sag and limit travel. I’m getting arb bull bar and winch.

2005 jimny

thanks:)

Attachments:

Please Log in or Create an account to join the conversation.

Lambert
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

29 Oct 2025 17:13 #262514 by Lambert

Replied by Lambert on topic Suspension for bull bar with 4” lift

Jimny bits do a 4 inch lift. Dunno if it would still work out with a winch and bull bar but it might be worth asking them?

Temeraire (2018 quasar grey automatic)
Pavement princess or back road menace?
Bellerophon (2024 grello van daily)
ADORJ Attention Deficit Ooooh Race Jimny!

Please Log in or Create an account to join the conversation.