A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
engine change
- AllanBartlett177@gmail.com
- Topic Author
- Offline
- New Member
-
Registered
Less
More
- Posts: 2
- Thank you received: 0
25 Feb 2025 22:42 #259590
by AllanBartlett177@gmail.com
engine change was created by AllanBartlett177@gmail.com
hi all has anyone fitted M13a engine from suzuki swift into suzuki jimny if so are there any major differculties
Please Log in or Create an account to join the conversation.
25 Feb 2025 23:02 #259591
by fordem
Replied by fordem on topic engine change
What engine did the Jimny originally have, and is the Swift engine VVT?
Please Log in or Create an account to join the conversation.
- AllanBartlett177@gmail.com
- Topic Author
- Offline
- New Member
-
Registered
Less
More
- Posts: 2
- Thank you received: 0
26 Feb 2025 07:19 #259592
by AllanBartlett177@gmail.com
Replied by AllanBartlett177@gmail.com on topic engine change
the jimny has a M13a in it. I dont have a swift engine at the moment but there are alot more swift engines available is there a particular swift model that will fit the jimny
Please Log in or Create an account to join the conversation.
26 Feb 2025 11:24 - 26 Feb 2025 11:27 #259593
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic engine change
As Fordem says you need to fint out if your car is a VVT or not. And use the same from the Swift.
Usually your engine is a VVT from 2005 and later.
There are differences between markets and models I may not be aware of but the engine longblock should fit.
The basic engine from the donor swift, and all the outside parts from your existing engine like generator, starter, intake, exhaust, pipes and hoses, electrical and so on.
Usually your engine is a VVT from 2005 and later.
There are differences between markets and models I may not be aware of but the engine longblock should fit.
The basic engine from the donor swift, and all the outside parts from your existing engine like generator, starter, intake, exhaust, pipes and hoses, electrical and so on.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Last edit: 26 Feb 2025 11:27 by yakuza.
Please Log in or Create an account to join the conversation.
Time to create page: 0.203 seconds