A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Uprated or locking rear door stay??
18 Oct 2024 20:55 - 18 Oct 2024 20:57 #257945
by 300bhpton
Uprated or locking rear door stay?? was created by 300bhpton
Does such a thing exist?
While laning in Salisbury Plain, one thing I did notice that I'd like to improve is the rear door. On the level it is fine, but if you are even a modest side slope or slightly downhill the rear door will not stay open on its own. Which is quite annoying if you are trying to make a cup of tea.
Does anyone offer any kind of locking gas strut or other method of securing the door in the open position? I've had a look about, but not come across anything yet.
While laning in Salisbury Plain, one thing I did notice that I'd like to improve is the rear door. On the level it is fine, but if you are even a modest side slope or slightly downhill the rear door will not stay open on its own. Which is quite annoying if you are trying to make a cup of tea.
Does anyone offer any kind of locking gas strut or other method of securing the door in the open position? I've had a look about, but not come across anything yet.
Last edit: 18 Oct 2024 20:57 by 300bhpton.
Please Log in or Create an account to join the conversation.
19 Oct 2024 09:10 - 19 Oct 2024 19:05 #257947
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Replied by Soeley on topic Uprated or locking rear door stay??
There are a few options.
1) Automatic rear door stay I made from 25mm plastic pipe, cut at one end to clip onto the ball mount the gas strut is fastened to. I had seen ones you can buy but they are to put on and remove as required. This stay on even with the door closed.
The one in the video clip is the MK2, I left an extended length of pipe on the underside to make it easier to just flick up into the unlock position.
Strut Lock
2) A simple hook on/off bracket, (can't find it online now) but basically a length of flat bar bent 900 upwards at each end, with an angled slot in each end. It simply hooks over the strut rod and remove to close the door.
3) I have an extended strut to open the rear door to 900 to allow room for my fridge slide, I got it from SGS Engineering and bought the optional strut lock with it, however having just looked again, it looks like they have stopped doing the lock.
1) Automatic rear door stay I made from 25mm plastic pipe, cut at one end to clip onto the ball mount the gas strut is fastened to. I had seen ones you can buy but they are to put on and remove as required. This stay on even with the door closed.
The one in the video clip is the MK2, I left an extended length of pipe on the underside to make it easier to just flick up into the unlock position.
Strut Lock
2) A simple hook on/off bracket, (can't find it online now) but basically a length of flat bar bent 900 upwards at each end, with an angled slot in each end. It simply hooks over the strut rod and remove to close the door.
3) I have an extended strut to open the rear door to 900 to allow room for my fridge slide, I got it from SGS Engineering and bought the optional strut lock with it, however having just looked again, it looks like they have stopped doing the lock.
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Last edit: 19 Oct 2024 19:05 by Soeley.
Please Log in or Create an account to join the conversation.
19 Oct 2024 19:07 #257957
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Replied by Soeley on topic Uprated or locking rear door stay??
That is the one I have (option 3 above).I've got these for sale if you're interested?
www.bigjimny.com/index.php/forum/11-for-...or-gas-struts#248039
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Please Log in or Create an account to join the conversation.
21 Oct 2024 19:57 #257985
by Busta
Replied by Busta on topic Uprated or locking rear door stay??
This post inspired me to add a locking sleeve to my door strut. It's very similar to the ones other have made, but it lifts up to lock and is held in place by the door trying to close. Open the door slightly and it drops down and the door returns to operating as normal.
Please Log in or Create an account to join the conversation.
Time to create page: 0.259 seconds