A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Re:Re:Gen 4 Drivers Mat question?

DrRobin
Topic Author
Offline
Platinum Member
Registered
Newbie in Northumberland

24 May 2024 17:24 #256072 by DrRobin

Gen 4 Drivers Mat question? was created by DrRobin

My Gen 4 came to me with rubber mats, the drivers side has two holes at the rear with plastic surrounds which are obviously meant to locate on two pins in the Jimny floor. However, my Jimny doesn't have the floor pins or clips and as a result the drivers side mat slides around a bit.

The mats look like these www.glynhopkinpartsonline.co.uk/cdn/shop...024.jpg?v=1633003538

Was it meant to have a couple of fixings fitted in to the floor or are these an after market fitment?

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

Roger Fairclough
Offline
Platinum Member
Registered

24 May 2024 17:34 #256073 by Roger Fairclough

Replied by Roger Fairclough on topic Gen 4 Drivers Mat question?

Your rubber mats should have been supplied with two plastic clips that fit onto the seat mounting crossmember and hold the rubber mat firmly in place. This is only for the drivers mat. The passenger mat is slightly different in size and doesn't need the clips.

Roger

Please Log in or Create an account to join the conversation.

DrRobin
Topic Author
Offline
Platinum Member
Registered
Newbie in Northumberland

24 May 2024 19:48 #256080 by DrRobin

Replied by DrRobin on topic Gen 4 Drivers Mat question?

Thanks Roger, Do you have these and if so could you snap a quick picture please?

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

24 May 2024 20:17 #256083 by mlines

Replied by mlines on topic Re:Gen 4 Drivers Mat question?

Rubber mats, the fittings and fabric mats

Sent from my ThinkPhone by motorola using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

The following user(s) said Thank You: RumbleAndSway

Please Log in or Create an account to join the conversation.

DrRobin
Topic Author
Offline
Platinum Member
Registered
Newbie in Northumberland

25 May 2024 08:42 #256088 by DrRobin

Replied by DrRobin on topic Re:Gen 4 Drivers Mat question?

Thanks Martin,

I have the rubber mats as shown in the first picture but the previous owner didn’t fit the clips. Is it possible to get the clips as a separate item or can you buy aftermarket clips?

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

25 May 2024 09:45 #256090 by mlines

Replied by mlines on topic Re:Re:Gen 4 Drivers Mat question?

I don't think they are available separately but I will ask for you

On mine, purchased new from a dealer (but not my usual dealer), the mats were placed in the car and the clips were in a bag in the glovebox.

Sent from my ThinkPhone by motorola using Tapatalk

Please Log in or Create an account to join the conversation.

Time to create page: 0.148 seconds

Re:Re:Gen 4 Drivers Mat question?

Events Menu